Main-Line Models and Sizes
EZ-FLO manufactures units in varying tank sizes and for various applications.
The size of the unit represents the approximate capacity of the holding tank for the concentrated fertiliser and come in the following tank sizes:
Large domestic or small commercial:
EZ 001-CX
1.5 gallon (5.7 litres) (Spec sheet, click here)
EZ 003-CX
2.5 gallon (9.5 litres) (Spec sheet, click here)
EZ 005-FX
5 gallon (19 litres) (Spec sheet, click here)
Large Commercial, Park, Nursery or Agriculture:
EZ 010-HC
10 gallon (38 liters) (Spec sheet, click here)
EZ 017-HC
17 gallon (66 liters) (Spec sheet, click here)
EZ 025-HC
25 gallon (96 liters) (Spec sheet, click here)
All models are equipped with shutoff valves for ease of refill and a pressure relief valve that releases and resets when water pressure in the tank exceeds 150 pounds per square inch (10 bars). All main-line versions now carry a five (5) year manufacturer's warranty. See our Warranty Section for further details.
EZ-FLO may be able to manufacture custom tanks with other capacities.
To place and order or for more information please call (07) 4725 6088 or send an email or request a quote.
Size the Model to your Landscape
What size model you choose to order is dependent on a few factors.
- What is the composition of the landscape materials? Turf uses more irrigation water than a dense ground cover or shrubs with deeper root masses.
- How often do you want to refill?
In the end, this last point is the one that is the ultimate determining factor. If you want to refill less frequently, simply go up in size. If you do not mind refilling more often, then you can get by with a smaller size than what would be recommended. The following table identifies a typical landscape configuration and sizes that can be served with each EZ-FLO main line model along with other sizing information.
Please note that coverage levels assume a 4-6 week desired refill cycle for EZ001-CX to EZ005-FX models. High capacity models (designated as HC) EZ010HC, EZ017HC and EZ025HC are designed for commercial landscapes and growers . Property sizing for those units is based on a 2-3 week refill schedule. Growers and nurseries use other sizing metrics (kg per m2 and PPM) which can be found in their related web pages.
Standard mainline model selection chart based on m2 to be fertigated
or
High capacity (HC) mainline model selection chart based on m2 to be fertigated
Fertilizer Distribution Rates
EZ-FLO's patented flow technologies ensure that the proportion of fertiliser to water remains constant from the beginning of the cycle until the tank is depleted of fertiliser. For a detailed look at how EZ-FLO's technology works see our Technical Specifications.
All EZ-FLO fertigation units have an adjustable cap with four reference settings corresponding to the amount of fertiliser mixed with the water: The cap can also be set at points between these four reference settings for unlimited adjustment flexibility within the maximum and minimum proportioning rates for the cap.
Main-Line Cap
| Cap Reference Setting |
Water to Fertilizer Proportioning Ratio |
| Slow | 15,000 to 1 |
| 1 | 8,000 to 1 |
| 2 | 2,000 to 1 |
| Fast | 400 to 1 |
To place and order or for more information please call (07) 4725 6088 or send an email or request a quote.